+-------+ | iperf | +-------+ Iperf is a tool for active measurements of the maximum achievable bandwidth on IP networks. It supports tuning of various parameters related to timing, protocols, and buffers. For each test it reports the bandwidth, loss, and other parameters. This version, sometimes referred to as iperf3, is a redesign of an original version developed at NLANR/DAST. iperf3 is a new implementation from scratch, with the goal of a smaller, simpler code base, and a library version of the functionality that can be used in other programs. iperf3 also a number of features found in other tools such as nuttcp and netperf, but were missing from the original iperf. These include, for example, a zero-copy mode and optional JSON output. Note that iperf3 is NOT backwards compatible with the original iperf. https://software.es.net/iperf +-----------------------------+ | Das Menue im Setup-Programm | +-----------------------------+ 4. Service administration x. iPerf administration 1. View documentation 2. Edit configuration 3. Advanced configuration file handling 4. Show status 5. Stop service 6. Start service 7. Restart Service 0. Return +---------------------------------------------+ | Die Konfigurationsdatei /etc/config.d/iperf | +---------------------------------------------+ START_IPERF Soll iPerf3 gestartet werden oder nicht? Gueltige Werte: yes, no Standard-Einstellung: START_IPERF='no' IPERF_START_PORT Start Port der Instanzen. Gueltige Werte: Port Standard-Einstellung: IPERF_START_PORT='5900' IPERF_INSTANCES Anzahl der iPerf3 Instanzen. Gueltige Werte: Zahl (1-9) Standard-Einstellung: IPERF_INSTANCES='1'